Details anzeigen
Einbauzeit etwa: 0,15 Stunde(n)
Gewicht: 0,50 KG
Packungsgrösse (LxHxB): 15x8x3 cm
Anzahl pro Fahrzeug: Anzahl nicht angegeben
Set includes
- Drill with handle
- Awl with handdle
- 5 rubber cords, each 10 cm long
- Tube of glue (12g)
How to use the kit:
1. Locate the area where the tyre has been punctured.
2. Grease the cutter with the glue provided and drive it into the hole, following the angle of the hole fill it well with glue.
3. Thread the cord onto the awl and bend it in half with the ends up.
4. Apply glue to the cord and use the awl to press it into the hole, following the angle of the previous penetration. With a firm motion, push the awl and cord through the damaged area.
Make sure that the cord goes all the way through the tyre.
Be careful not to pull the entire cord inwards.
The two ends of the cord should protrude approximately 0.5 - 1cm above the tyre tread. Firmly remove the stalk from the tyre (do not twist the stalk inside the tyre when removing it - this may break it).
5. Cut off the two protruding ends of the cord leaving 5mm above the tyre. The cord will flush with the tread surface as you drive.
Wir empfehlen, die Montage von einer fachkundigen Person durchführen zu lassen.
Lassen Sie eins unsere BMW spezial Werkstätte die Montage machen, wir haben die Erfahrung und günstiege Preise!
ALLES FÜR BMW & MINI!
In unserem Online-Katalog finden Sie "nur" ca. 27.000 neue und gebrauchte Produkte von rd. 500.000 BMW & MINI Produkte, die wir liefern können, bitte kontaktieren Sie uns, wenn Sie nicht finden, was Sie
benötigen!
WUSSTEN SIE DAS WIR AUCH SPEZIALISTEN IM BEREICH BMW MOTORRAD SIND! KONTAKTIEREN SIE UNS GERNE FÜR EIN ANGEBOT.
Denken Sie daran, wir haben immer die niedrigsten Preise und die größte Auswahl! Bitte beachten Sie auch, wenn Sie die Original BMW / MINI-Ersatzteilnummer besitzen (11-stellig, möglicherweise nur die letzten 7-stellig) - dann können Sie diese direkt in das Suchfeld oder den Warenkorb eingeben und den Preis und ggf. den Preis sehen. Bestellen Sie es, auch wenn das Teil nicht in unserem Online-Katalog zu finden ist!
Kontaktieren Sie uns! - unter odense@schmiedmann.com